FST20L100-A2-5RT
20.1", 1600 x 1200 UXGA, Fully Sealed Stainless Steel Monitor with Five-Wire Resistive Touchscreen and VGA Port
Features
- Brushed stainless steel enclosure
- IP65 sealed, with anti-corrosive rubber providing 360 degree protection
- Full IP65 I/O connectors protect from any particles, water, and corrosive agents
- Technical support for drivers (installing, and supporting files) and hardware (screens, monitors, controllers, peripherals), including troubleshooting procedures and general system issues
- Customer service and sales support help with product selection, order management, and warranty status
Product Documentation
FST20L100-A2-5RT [ .PDF ] Product Video [ .WMV ]
Introduction
The AIS 20.1” rugged stainless LCD display monitor is fully-integrated, commercially off-the-shelf unit (COTS) that combine high- performance resistive touch screen, waterproof and dustproof, fully sealed stainless steel chassis with IP65/ NEMA 4/4X Ingress protection rating designed specifically for use in the food, beverage, pharmaceutical and tobacco industries for operator control and monitoring. This 20.1” stainless LCD monitor display can be directly connected to industrial processing machines, control systems and automation systems. The AIS 20.1”stainless steel LCD display touchscreen monitor is designed to withstand high temperatures, vibration, dirt and dust, and other typical conditions encountered on factory floors.
Specifications
|
Display |
20.1" diagonal, Active matrix TFT LCD |
|
Aspect Ratio |
16:9 (Widescreen) |
|
Active Area |
408 (H) x 306 (V) mm |
|
Native (Optimal) Resolution |
1600 x 1200 |
|
Other Supported Resolutions |
VGA 640 x 480 (60/66/70/72/75 Hz) SVGA 800 x 600 (60/70/72/75 Hz) XGA 1024 x 768 (60/70/75 Hz) SXGA 1280 x 1024 (60/70/75 Hz) WXGA+ 1440 x 900 (60/75 Hz) UXGA 1600 x 1200 (60 Hz) |
|
Colors |
16.7M (6bits+FRC) |
|
Brightness (Typical) |
LCD Panel: 300 nits Resistive Touch: 240 nits |
|
Viewing Angle (Typical) |
Horizontal: 178° Total Vertical: 178° Total |
|
Contrast Ratio (Typical) |
800:1 |
|
Input Video Format |
Analog VGA |
|
Input Video Signal Connector |
Mini D-Sub 15-Pin VGA Type |
|
Power Supply |
External DC (Power Brick) |
|
Input Voltage |
AC: 100–240 VAC, 50/60 Hz DC: 12.0 V±10% |
|
Power Consumption (Typical) |
41W |
|
On-Screen Display (OSD) |
Controls (back): menu, up, down, select, power Settings: contrast, brightness, H/V position, RGB (color temp), clock, phase, recall |
|
Touch Technology |
Resistive (USB (Type-B): Touch Interface) |
|
Environmental |
|
|
Temperature |
Operating: 0°C to 40°C (32°F to 104°F) Storage: -20°C to 60°C (-4°F to 140°F) |
|
Humidity (Non-condensing) |
Operating: 20%-80% Storage: 10%-90% |
|
Other |
|
|
Form Factor |
Chassis/VESA Mount |
|
Enclosure Color |
Stainless Steel |
|
MTBF |
50,000 Hours Demonstrated* |
|
Mounting Options |
100 mm or 75 mm VESA mount |
|
Sealing |
Touchscreen Sealed to Bezel Touchscreen Sealed to LCD |
|
Compliance |
CE, FCC (DOC) |
|
|
|
*MTBF (Mean Time between Failures)
An MTBF measurement is based on a statistical sample and is not intended to predict any one specific unit's reliability; thus MTBF is not, and should not be construed as, a warranty measurement.